Switching On And Off The Beep; Automatic Pan Detection - Asko HI1995G Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION

Switching on and off the beep

EN 20
Tip
You can press and hold the + or - button to set the desired cooking
time quicker.
1. Press the on/off button on the far left twice.
2. Press and hold the << button and the + button simultaneously until
you hear a beep.
The beep is now switched off for all button operations, except for
the pause button and the child lock button. Note: the kitchen timer
alarm and the beep for error messages cannot be switched off.
3. Use the same button combination to switch the sound back on.
Switching on/off the automatic pan detection
If, after the hob has been turned on, a pan is placed in an inactive
cooking zone, the corresponding operating controls light up and this
can be used immediately (without operating the on/off switch).
If the cooking zone is not activated within 10 seconds, the light will go
out. It can be re-activated by removing the pan and then replacing it or
by using the on/off switch.
This function is active by default, but can also be switched off. This is
done by switching the hob off and operating the 'menu' (6) and 'on/off
button' (21) on the left-hand control panel for 5 seconds. 'APd OFF' will
appear on the display. By repeating this process, the function can be
reactivated and the 'APd On' will appear on the display.

Publicité

Chapitres

Table des Matières
loading

Table des Matières