Boost; Two Cooking Zones One In Front Of The Other - Asko HI1995G Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION

Boost

Two cooking zones one in front of the other

You can use the 'boost' function to cook at the highest power level
during a short period of time (max.10 minutes). After the maximum
boost time the power will be reduced to setting 12.
Switching on 'boost'
1. Put a pan on a cooking zone.
2. Press the >> button immediately after you have switched on the
zone.
Level 12 and 'boost' appear in the display.
• If a cooking zone has already been set to a power level and you
want to use 'boost', press several times the >> button or the
+ button of the cooking zone concerned.
Switching off 'boost'
'Boost' has been switched on, the display shows level 12 and 'boost'.
1. Press the << button or the - button.
In the display you will see a lower level.
Or:
2. Press the on/off button of the cooking zone you want to switch off.
You will hear a beep and the level in the display disappears.
The cooking zone has been switched off completely.
• Two cooking zones one in front of the other affect each other.
When both of these cooking zones are switched on at the same
time, the power is automatically shared between them. The first
set cooking zone will remain at the set setting at all times. The
maximum set setting for the cooking zones to the front or back
that is added later, depends on the setting of the first cooking
zone. When you have reached the maximum amount of cooking
setting combinations, the last set setting will start to flash and is
automatically lowered to the highest possible setting.
• Two cooking zones alongside each other have no effect on each
other. You can set both cooking zones on a high setting.
• If the vario zones are bridged, they cannot be set to boost and the
menu functions cannot be used.
EN 13

Publicité

Chapitres

Table des Matières
loading

Table des Matières