Changing The Navigation Settings - Kenwood KNA-G520 Mode D'emploi

Changing the Navigation Settings

From the Menu page, touch
Vehicle—specify your vehicle type.
Preference—select a preference for route calculations.
Ask Preference—select whether the unit asks for your
preference each time it calculates a route.
Next Turn Pop-up—select when the Next Turn pop-up
window appears.
KNA-G520 Instruction Manual
Settings Navigation.
>
Dead Reckoning—set up Dead Reckoning so the
navigation system can track your location accurately
in areas where satellite reception is poor. For more
information about these settings, refer to the KNA-G520
Installation Guide.
Off-Route Recalculation—set the way the unit
responds when off the route. You can silence the "off-
route, recalculating" message here.
Continuous Auto Routing—enable or disable the
Continuous Auto Routing feature. This feature allows
the unit to continually search for a better route to your
destination. Continuous Auto Routing may be useful if a
traffic accident occurs or there are time-restricted turns
on the current route. A
a better route than the one you are currently taking is
available. Touch the to take the better route.
Avoidance Setup—see page
C S
HANGING THE ETTINGS
is displayed on the map when
18.
EN-29