Panasonic TY-WK4P1RW Instructions De Montage page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
7. Anchoring the plasma TV
Install the accessory Unit fastening screws
mounting holes on the sides (left and right) of the wall-hanging
bracket used to secure the plasma TV.
Securely tighten the left and right red-marked screws
at the left and one at the right) used to anchor and release the
plasma TV in the red-marked screw mounting holes on the side
of the wall-hanging bracket used to anchor and release the
plasma TV.
(Tightening torque: 1.2 to 1.5 N•m)
Note
• In order to prevent the plasma TV from becoming disengaged from the
wall-hanging bracket, the Unit fastening screws
tightened at the left and right as far as their bases.
8. How to remove the plasma TV from the
wall-hanging bracket
Remove the Unit fastening screws
the right) installed at the sides of the wall-hanging bracket.
While lifting the bottom part of the plasma TV, pull the plasma
TV toward you.
Once the insulation spacers at the bottom have been released,
lift the plasma TV straight up.
(2) into the screw
(one
must be securely
(one at the left and one at
Red-marked screw
used to anchor
and release the plasma TV
Unit fastening screw
Hole for mounting the screw
used to anchor the plasma
TV
Mounting hole for red-
marked screw used to
anchor and release the
plasma TV
Wall-hanging bracket
Unit fastening screw
Insulation spacer at the
bottom
7

Publicité

Table des Matières
loading

Table des Matières