Using An Aux Input; Connecting The Rear Display; When Using A Rear Display Connected To Rear Video Output - Pioneer AVIC-5201NEX Manuel D'installation

Masquer les pouces Voir aussi pour AVIC-5201NEX:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connecting the video component
This product
15 cm (5-7/8 in.)
23 cm (9 in.)
Yellow
Red, white
(VIDEO INPUT)
(AUDIO INPUT)
RCA cable
(sold separately)
To audio outputs
To video output
External video
component
(sold separately)
NOTE
This mode is available when the setting of AV
input is set to "Source". (For details, refer to
Operation Manual.)

Using an AUX input

This product
AUX input
Mini-jack AV cable
Mini-jack extension
(CD-RM10)
cable
(sold separately)
2 m (6 ft. 7 in.)
Red, white
Yellow
RCA cables
(sold separately)
To video output
To audio outputs
External video
component
(sold separately)
NOTES
• This mode is available when the setting of
AUX input is set to "On". (For details, refer to
Operation Manual.)
• When connecting an external video
component using a mini-jack AV cable, use
a separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-RM10)
(sold separately) for wiring. If you use other
cables, the wiring position might differ resulting
in disturbed images and sounds.
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Ground
Connecting the rear
display
This product
Yellow (V OUT)
Rear audio output
Mini pin plug cable
RCA cable
(sold separately)
(sold separately)
To audio inputs
To video input
Rear display with
RCA input jacks
(sold separately)
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This product's rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
En
11

Publicité

Chapitres

Table des Matières
loading

Table des Matières