Intermatic Ascend STW700W Guide D'installation Et De Configuration Rapide page 3

WARNINGS/SAFETY
Risk of Fire or Electric Shock
• Disconnect power at the circuit breaker(s) or disconnect
switch(es) before installing or servicing.
• Installation and/or wiring must be in accordance with
national and local electrical code requirements.
• Only use copper conductors rated 105°C minimum.
• Battery is not user replaceable.
• Do NOT use timer to control devices that could have
dangerous consequences due to inaccurate timing, such as
sun lamps, saunas, heaters, and slow cookers.
Dispose of product per local regulations on the disposal of
lithium batteries.
Ratings
Operating Voltage
General Purpose
Inductive Ballast
Tungsten/Incandescent
Electronic Ballast/LED Driver
LED Load
Motor Load
Dimensions
Type 1.C Action Operating Control, Pollution Degree 2, Impulse Voltage 2500 V
1
NOTICE
1
WARNING
120 VAC, 50/60 Hz
15 A
15 A
8 A
5 A
600 W
1 HP
2 3/4" H x 1 3/4" W x 1 1/3" D
3