Important; Examine The Chain Lubrication; Start The Machine; Stop The Machine - GreenWorks 1403402 Manuel D'utilisation

IMPORTANT

Examine the chain tension before each use.
It is recommended to use the cord retainer in the rear
handle to prevent accidental disconnection of the power
supply.
15.1 EXAMINE THE CHAIN
LUBRICATION
NOTE
Do not use the machine without sufficient chain
lubrication.
1. Examine the lubricant level of the machine from the
oil indicator.
2. Add the lubricant if it is necessary.

15.2 START THE MACHINE

15
13
1. Press the lock-out button (15).
2. Press the trigger (13) while you hold the lock-out
button.
3. Release the lock-out button.

15.3 STOP THE MACHINE

1. Release the trigger to stop the machine.
15
13
12
12
English

15.4 FELL A TREE

23
24
25
24
Recommendation that the first-time user should, as a
minimum practice, start cutting logs on a saw-horse or
cradle.
Before you start to fell a tree, make sure that
• The minimum distance between the areas of
bucking and felling is two times the height of the
tree.
• The operation does not
• Cause injury to personnel.
• Hit utility lines. If the tree touches utility lines,
immediately tell the utility company.
• Cause losses in property.
• The user is not in the danger area (24), for example,
the downhill side of the area.
• The escape paths (25) that extend back and
diagonally behind the felling direction (23) are clear.
The felling direction is controlled by
• The natural lean of the tree.
• The location of larger branches.
• The wind direction.
• Ensure there is no dirt, stones, loose bark, nails,
and staples on the tree.
26
50mm
27
1. Make a lower level notching cut (27). Make sure that
this cut is
a) 1/3 wide of the diameter of the tree.
b) Perpendicular to the felling direction.
11
25
28
50mm
29
EN