Basic System Connection - Sony DXC-970MD Mode D'emploi

Basic System Connection

To supply power to the camera, use the CMA-D2MD
camera adaptor (not supplied).
There are two connection methods, one using a CCDC
cable and the other using a CCMC cable. The CCDC cable
only supplies power to the camera. The CCMC cable
supplies power to the camera and transmits video signals
from the camera back to the camera adaptor.
Note on use of camera adaptors
Although the CMA-D2MD camera adaptor has two
CAMERA connectors (4-pin and 12-pin), the power
consumption of the DXC-970MD is such that two camera
units cannot be connected at the same time. Be sure to use
one camera adaptor for each DXC-970MD unit.
Note on connections
Be sure to turn off power supply for all equipment before
making any connections.
73