Getting The Most Out Of Dolby Pro Logic Surround Sound - Sony TA-VE800G Mode D'emploi

Using Surround Sound
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the centre mode according to your
speaker system. Then, equalize the speaker levels and
adjust the delay time of the PRO LOGIC sound field.
Note that you must have at least one additional pair of
speakers and/or one centre speaker to do the following
adjustments.
Selecting the centre mode
The amplifier offers you four centre modes:
PHANTOM, 3 CHANNEL LOGIC, NORMAL, and
WIDE. Each mode is designed for a different speaker
configuration. Select the mode that best suits your
speaker system configuration.
1
Click SOUND in the main menu.
2
Click PRO LOGIC to select the pro logic sound
field.
PRO LOGIC
MODE
3
Click SUR.
The Dolby Pro Logic SUR EDIT screen appears.
To select the pro logic sound field.
PRO LOGIC
MOVIE
MUSIC 1
MODE
28 GB
SOUND FIELD SELECT
VOL
+
SOUND FIELD ON OFF
–
BASS BOOST ON OFF
EXIT
SOUND FIELD SELECT
MUSIC 2
SPORTS
GAME
VOL
+
SOUND FIELD ON OFF
–
BASS BOOST ON OFF
SUR EXIT
4
Click C MODE repeatedly until the centre mode
you want is displayed. Select the centre mode by
referring to the following chart.
SUR EDIT
CENTER 0 dB
REAR 0 dB
RETURN
If you have Select
Front and rear PHANTOM
speakers, no
centre speaker
Front and centre 3 CH LOGIC
speakers, no rear (3 Channel
speaker Logic)
Front and rear NORMAL
speakers, and a
small centre
speaker
Front and rear
WIDE
speakers, and a
centre speaker
equivalent to your
front speakers
Adjusting the speaker volume
The test tone feature lets you set the volume of your
speakers to the same level. (If all of your speakers have
equal performance, you don't have to adjust the
speaker volume.)
Using the remote lets you adjust the volume level from
your listening position.
1
Click TEST.
The tone is emitted from each speaker
sequentially. The speaker emitting the test tone is
shown in red on the TV screen.
SUR EDIT
CENTER 0 dB
+
–
C MODE
+
VOL
– +
–
EXIT
So that
The sound of the
centre channel is
output from the front
speakers.
The sound of the rear
channel is output
from the front
speakers.
The bass sound of the
centre channel is
output from the front
speakers (because a
small speaker cannot
produce enough
bass).
For wide range
Dolby Pro Logic
Surround sound to
all speakers.
+
–
TEST