Unpacking; Disposal Of The Packaging; Setup Location Requirements - CASO DESIGN Crema Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
 Power base with cord
 Whisk for heating
PLEASE NOTE
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

15.3 Unpacking

Unpack your device as follows:
 Take out the device from the box and remove the interior and exterior packaging.
 You can find the whisk for frothing in the lid and the whisk for heating on the attachment
for the whisks in the jug.
 Clean the appliance thoroughly before the first use. (see chapter Cleaning and
maintenance)

15.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
PLEASE NOTE
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event of a
guarantee claim.

15.5 Setup location requirements:

 In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 The device must be set up on a firm, flat, horizontal surface with sufficient load-bearing
capacity.
 Choose the setup location in such a way that children cannot reach the device.
 The device is not intended to be installed in a wall or a built-in cupboard.
 Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
 The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
Caso Fomini Crema & Fomini Crema Inox
 Whisk for frothing
 Operating Instructions
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Crema inox16561662

Table des Matières