Switching Sound Alert On / Off; Setting Room Temperature Range; Setting Temperature Alert - Philips SCD489 Mode D'emploi

Menu options
EN
16
Switching sound alert on and off
If sound alert is switched on, the parent unit beeps as soon as
the second sound level light (B-9) lights orange while the
volume is switched off.
• Select Sound Alert, using – and + (B-10).
Confirm with OK (B-7).
• Select Alert on? or Alert oFF?.
Confirm with OK (B-7).

Setting room temperature range

You can set the temperature range (minimum and maximum
temperature) for your baby's room.
• Select TeMPerature – – °, using – and + (B-10).
Confirm with OK (B-7).
> Range appears on the display. Confirm with OK (B-7).
• Set the desired minimum temperature, using – and + (B-10).
Confirm with OK (B-7).
• Set the desired maximum temperature, using – and + (B-10).
Confirm with OK (B-7).
Note:When the set maximum temperature is lower than the
room temperature, the unit consumes more power
because the display is continuously lit.This is also the case
when the set minimum temperature is higher than the
room temperature.

Setting temperature alert

Temperature alert will sound from the parent unit if the actual
room temperature exceeds the set minimum or maximum
temperature or if the room temperature drops below 7°C or
rises above 33°C.
• Select TeMPerature – – °, using – and + (B-10).
Confirm with OK (B-7).
• Select Alert On/OFF, using – and + (B-10).
Confirm with OK (B-7).
• Select Alert On? or Alert OFF?.
Confirm with OK (B-7).