Cameo ZENIT W600i Manuel D'utilisation page 18

COLOUR TEMPERATURE (Tunable White)
The colour temperature mode enables you to configure the colour temperature from cold white
to warm white (CCT) and the brightness (Dim) of the light directly on the device. Select the colour
temperature mode as per the procedure previously described in SETTING STAND ALONE MODE
and confirm with ENTER. Now use UP and DOWN to select the menu item you wish to edit (ob-
serve arrow) and confirm with ENTER. The display will now show a three-digit number field and
you can use UP and DOWN to configure the desired value. Confirm with ENTER. Press MODE three
times to return to the main display (Mode Tunable White).
------------ Stand Alone ------------
Auto
Color Macro
Static
Tunable White
User Color
Timer
USER PRESETS (User Color)
The operating mode "User Presets" allows the overall brightness and a colour mixture of R, G, B
and W to be saved directly in the device in five individual colour presets. Select the User Color
mode as per the procedure previously described in SETTING STAND ALONE MODE and confirm
with ENTER. Use UP AND DOWN to select one of the stored presets Color1 to Color5 and confirm
with ENTER and select the submenu item you want to edit (see arrows). Confirm with ENTER. The
display will show a three-digit number field and you can use the UP and DOWN controls to set the
value as required between 000 and 255. Confirm by pressing ENTER again. When all settings are
configured as required, press MODE four times to return to the main display (Mode User Colour).
------------ Stand Alone ------------
Auto
Color Macro
Static
Tunable White
User Color
Timer
18
------------- Program x -------------
Dim <100>
CCT <255>
Dim CCT
000 000
- -
100 255
------------ User Color ------------
Color1
Color2
Color3
Color4
Color5
Mode
Tunable White
000
------------ Color1 ------------
Dimmer <255>
Strobe <255>
Red <255> 255
Green <255>
Blue <255>
White <255>
Mode
-
User Color