Connecting The Power Cord; U.s.a. And Canada; Https://Uc.yamaha.com/Support; Other Countries - Yamaha ESB-1090 Guide De Démarrage Rapide

Connecting the power cord

After all connections are complete, connect the supplied power cord
to the power connector on the unit and then plug the power cord into
an AC wall outlet.
Power connector
The unit (rear)
When the power cord is plugged into an outlet, the unit automatically
turns on.
 IMPORTANT
• This unit is set to Conference mode (mode for using the unit as a
speaker for remote conferencing) by default. To prevent
accidental operation during a remote conference, the unit's
z (power) button cannot be operated in Conference mode (the
remote control can be used to turn the unit on/off).
• See the Owner's Manual for instructions on operating the unit,
including operating and canceling Conference mode. The
Owner's Manual is available from the following websites:
To an AC wall outlet

U.S.A. and Canada

https://uc.yamaha.com/support/

Other countries

https://download.yamaha.com/

9
En