Backlight; Low Battery Indicator; Speed Selection; Auto-Zero Function - Gram AHZ Série Manuel D'utilisation

8. Remove the object from the weighing pan.
9. Place other items and the balance will calculate the percentage in
regard to the default sample.
If the sample value is less than 0.2d, the display will show the message
"no-PER". This means that the sample is too small; therefore, you will
need to add a greater sample.

bACkLIgHT

Press the

LOW bATTERY INDICATOR

If the battery indicator is activated in the upper left side on the display, this
means that the battery is low. In this case, recharge the battery using the
provided adaptor.

SPEED SELECTION

Press the
SPEED 2.

AUTO-ZERO fUNCTION

1. When the balance is Off, keep pressed the
releasing it, press the
"-Zero-", now release both keys.
10
key to activate or deactivate the internal backlight.
key for 3 seconds to select the desired mode: SPEED 1 or
key until the screen shows the message
key and without