Backlight; Hold Function; Zero Configuration - Gram SBZ Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

UF-4 Backlight
Modes:
-
Lit Off: Disable.
-
Lit A: Automatic
-
Lit on: Always activated.
Default value: Lit A (automatic)
1. Press the
2. Use the
3. Press the
UF-5 HOLD function (keeps the reading fixed on display for few seconds after
removing the load from the platter)
Modes:
-
HOLD 0 : Disable.
-
HOLD 1 : Weighing animals mode.
-
PCtXXX: To configurate the range from 001~100 in HOLD 1 mode.
timEXX: To configurate the time from 1 2 4 8 16 32 64 in HOLD 1 mode
-
Default value: HOLD 0
1. Press the
2. Use the
3. Press the
UF-8 Zero configuration
ZP 0 Disable function.
ZP 1 1 division not displayed
ZP 2 2 divisions not displayed
ZP 3 3 divisions not displayed
ZP 4 4 divisions not displayed
ZP 5 5 divisions not displayed
• This function is locked if HOLD 1 function is activated.
to access to backlight configuration.
key to select the desired mode.
key to confirm.
key to access to HOLD function configuration.
key to select the desired mode.
key to confirm.
8

Publicité

Table des Matières
loading

Table des Matières