Auto-Tare Function - Gram AHZ Série Manuel D'utilisation

2. Press and hold the
"Zero*d".
3. Press again the
4. Select the desired option (from 0 to 5)
Zero0d. Auto-zero function not activated.
Zero5d. Auto-zero function activated = 0.05g – 300.09g
(Default value: Zero5d)

AUTO-TARE fUNCTION

1. Press the
2. Press the
3. Press the
4. Select the desired option (from 0 to 9).
tArE0d.
tArE9d.
(Default value: tArE9d)
5. Press the
will return to normal weighing mode "0.00".
key until the display shows the message
key.
key, the display will show the message "-tArE-".
key, the display will show the message "tArE*d".
key twice.
Auto-tare function not activated.
Auto-tare function activated. This means that when a
weight is placed on the weighing pan, the balance will
tare automatically its weight.
key to confirm and save the configuration. The balance
0.05g – 600.09g
0.05g – 3000.09g
11