Using Your Cleaner - Hoover RA22HCG Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12

USING YOUR CLEANER

There are four working modes:
• TEMPORARY MODE: The product will start working when you press on the ON/OFF Switch and stop when released. [3A]
• CONTINUOUS MODE: To enable continuous mode you can pull switch lever back and it will click into place. [3B] To
disable continuous mode you can push the switch lever forward.
• CARPET MODE: Press the Carpet button to use the product on carpets. [4A]
• TURBO MODE: Press Turbo button to full power on either floor or carpet mode. [4B]
NOTE: Temporary mode and continuous mode are recommended to clean hard floor; Carpet mode activates agitator and
is recommended for lifting dirt and debris from carpet pile.
IMPORTANT: After each use of your product, please ensure to push the switch lever forward to the unlocked position.
Failure to do so may result in a reduction in battery life or failure.
FRONT WIPER BLADE ASSEMBLY
To obtain the best crevice performance it is recommended to assemble the front wiper blade to the soleplate of the nozzle.
Grip the wiper blade and insert one end into the slot, slide in until fully home, press down the blade end to ensure location. [20]
SAFETY PROTECTION SYSTEM
To ensure the reliability of the product is not affected if used under arduous conditions, the product features an integrated
safety protection system.
NOTE: The Safety protection system will action if the agitator has a blockage or is locked, once actioned, the agitator will
stop rotating and the white Led lights on the front of the nozzle will go out. If this happens, simply turn off your product
and clear the agitator obstruction. To resume cleaning, press the on/off button and the product will start in normal mode.
DISPLAY Led:
This cleaner is equipped with a Led display. When the product is ON and the display illuminated the indicators show the
following information.
BATTERY LEVEL INDICATOR:
4 points
=
100% charge
3 points
=
75% charge
2 points
=
50% charge
1 point
=
25% charge
CHARGING
During the charging process if the battery charged level is below 25% you will see the first Led blink until it reaches above
25%, then it will stay illuminated. This process will continue on all points of the Led indicating level of battery charge 25%,
50%, 75%, etc. When the battery charge has reached 100% all 4 points will be illuminated.
Please note to ensure your battery is being charged at a safe working temperature we have fitted a safety device. If this
device activates and you commence the charging process then you will see the first Led flash until it has reset. After it has
automatically reset the normal charging process as described above will commence.
DISCHARGING
When the product is running and the batteries are discharging the Led indicator light will start to flash when the battery
capacity is lower than 5% indicating the need to recharge.
ACCESSORIES:
2 IN 1 CREVICE & DUSTING BRUSH*, 2-1 LARGE DUSTING & FURNITURE BRUSH*, LONG FLEXIBLE CREVICE
TOOL*, MULTI FUNCTION UP TO TOP TOOL* AND MINI TURBO NOZZLE*.
The above accessories can be fitted directly into the handheld unit or one side of the tube. [5]
RADIATOR TOOL* / DEEP CLEANING BRUSH* / PARQUET CARESSE NOZZLE*
The accessory adaptor* must be fitted when using any of the above accessories. [5]
NOTE: The mini-turbo nozzle is ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily
backwards and forwards. After using, please remove hair / threads collected on the brush with scissors if necessary.
NOTE: The long flexible crevice tool is ideal for cleaning in hard to reach areas, underneath furniture and in your car.
NOTE: The radiator tool is ideal for cleaning inside and around cabinets, radiators, couches, blinds and more.
NOTE: The deep cleaning brush is useful to clean in tight spaces without scratching surfaces, and inside your car.
NOTE: The multi-function tool is designed to easily clean delicate surfaces without scratching and all area's that are hard
to access or reach. The multi function tool is made up of three key parts:
1. Crevice tool this is ideal for accessing tight spaces.
* Certain Models Only
4
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rhapsody 2

Table des Matières