Table des Matières
Publicité
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Safety notes
Operating voltage 230 V AC!
Risk of injury from electric shock!
Do not reverse L+N! Connect PE!
- Connection must be carried out by a certified
electrical technician
- Danger of crushing hands and fingers!
- Keep people away from the operating area of the
drive
- Keep children away from the control
- Use only in dry rooms
- Suitable for indoor mounting only. Use rain
detector in locations if there is a risk of rain
- Use unmodified original D+H parts only
Observe enclosed red safety note!
Functional description
ACB interface
ACB is used for secure communication between
the drive and compatible D+H control systems. It
enables activation, diagnostics and configuration
with perfect position, directly from the control
panel. In this process, all status messages, such
as the OPEN and CLOSED signals, opening
stroke and drive errors, are transmitted to the
control panel.
The ACB bus is based on an open Modbus RTU
protocol via which the actuator can be directly
controlled and queried.
Further information can be found in the D+H ACB
Planning Manual.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following directives:
2014/30/EU, 2014/35/EU
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Dirk Dingfelder
Member of the Board
24.06.2019
99.828.02 1.3/01/20
Maik Schmees
Authorized signatory, Technical Director
Intended use
- Drive for electric opening and closing for
louvre windows
- The louvre must be prepared by the louvre
manufacturer for the application of the drive
- Operating voltage 230 V AC
- Useable for smoke ventilation as well as daily
natural ventilation
- See also ACB planning manual
- Suitable for indoor mounting only
Features
- Protection system for the main closing edge
- Relief of pressure on window gasket after closing
- Connection via plug connector
- Direct connection of additional closing edge
protection at the drive possible (SKS option)
Especially LDx-5:
- Stroke programming with magnet
Especially LDx-5-ACB:
- ACB (Advanced Communication Bus) bus
interface with ModBus protocol for the
connection to compatible D+H control panels or
direct integration into building management
systems, for example
- BSY+ electronics for reliable and accurate
synchronous operation of up to 2 drives
- Individually programmable via software SCS
Scope of supply
Drive unit with 2.5 m
The louvre-specific tappet driver and the gaskets for
increasing the ingress protection to IP 54 are
available separately.
Guarantee
You will get 2 years guarantee for all D+H products
from date of verified handing over of the system up to
maximal 3 years after date of delivery, when
mounting and starting has been carried out by an
authorized D+H-distributor.
D+H guarantee is expired, with connection of D+H
components with external systems or with mixing of
D+H products with parts of other manufacturers.
English
(ACB: 2× 2.5 m)
silicone c
LDx 1x00-5 /-ACB
able.
5/20
Publicité
Table des Matières
