Maintenance; Software - Rancilio KRYO 65 OD Mode D'emploi

- To cancel before its finished dispensing, release the filter
holder button, than press any button on the keypad.
- Level out the coffee contained in the filter and tamp the
coffee with the tamper;
- Check that there are no coffee grounds on the rim of the
filter holder.
Activation by keypad:
- Place the filter holder in the filter holder fork (Fig. 1-8).
- Select the dose of coffee requested - single, double or
customized dose (Fig. 1-12 to 14). The LED of the selected
dose glows. The customized dose button has no LED.
The selected dose will also be shown in the display
- The grinder runs the predefined time and stops automatically.
- To interrupt before its finished grinding, press the same
button of the keypad. The LED blinks now. The grinding can
be continued by pressing the same button again.
The grinding will be stopped with any other button and
cannot be continued.
- Level out the coffee contained in the filter and tamp the
coffee with the tamper;
- Check that there are no coffee grounds on the rim of the
filter holder.

3. MAINTENANCE

Maintenance operations should be carried out with the machine
turned off and cold, and with the plug removed from the power
source.
Do not use metallic or abrasive tools, such as steel wool, metal
brushes, needles, etc., or detergents (alcohol etc.), but simply a
damp cloth or sponge.
3.1. Daily
- Clean the housing and the grounds tray.
- Clean the filter holder fork area.
- Clean the coffee outlet with a brush.
3.2. Periodically or after intense use
Empty the bean hopper, and clean it of oily residues left by the
coffee with a mild soap solution.
Waste materials used for processing or maintenance, if not
biodegradable or pollutant, should be placed in separate
containers and taken to suitable collection centers.
3.3. Burr replacement
KRYO 65 OD has an integrated counter, which informs the user
after the predefined amount of coffee is grinded, that the burrs
have to be replaced.
This alert can be activated by the service technician during the
commissioning. We recommend activating the alarm.
The burr replacement has to be done by a qualified service
technician only.
Please get in contact with your local sales organization.

4. SOFTWARE

KRYO 65 OD has three menus to operate with.
4.1 Use of Buttons
To configure the KRYO 65 OD the dose buttons will be used with
an additional function.
The single dose button (Fig. 1-12) will be used as "-"button, the
double dose button (Fig. 1-13) as "+"button and both buttons to
browse through the menu. The customized dose button (Fig. 1-14)
is used as confirmation or ESC-button depending on the menu
accessed.
4.2 Dosing menu
In the dosing menu the amount of coffee dispensed by one button
can be changed.
- Press the selected button for 3 seconds
- Change the value of the specific button
- Confirm the change with the confirmation button
4.3 Barista menu
The "Barista Menu" can be opened by pressing the confirmation
button (Fig. 1-14) for 5 seconds.
Any additional information is given in the software tree below.
4.4 Technician menu
Must be performed by a qualified technician.
The parameters with the grey background are only accessible for
the service technician
The access to this menu is given in another chapter of the manual.
9