Bosch GBM 16-2 E Instructions D'emploi page 9

EURO • Printed in Germany • BA 3 609 929 468 • GBM 16-2 • GB • OSW 02.05
3 609 929 468.book Seite 3 Donnerstag, 2. Mai 2002 10:51 10
Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine it must be
disposed of safely.
Environmental Protection
Recycle raw materials instead of
disposing as waste
The machine, accessories and
packaging should be sorted for en-
vironmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine. The plastic com-
ponents are labelled for categorized recycling.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of
the product is 83 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
9 • 3 609 929 468 • TMS • 18.04.02
Service and
Customer Assistance
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Fax
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Fax
To be fitted
Australia
by qualified
Robert Bosch Australia L.t.d.
professional only
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
Fax
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
Fax
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 50 144
according to the provisions of the directives
89/336/EEC, 98/37/EC.
Dr. Gerhard Felten
Senior Vice President Engineering Head of Product Certification
2
.
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
English - 3
Service +44 (0) 18 95 / 83 87 82
............................
Advice line +44 (0) 18 95 / 83 87 91
....................
+44 (0) 18 95 / 83 87 89
.............................................
Service +353 (0)1 / 414 9400
...................................
+353 (0)1 / 459 8030
....................................................
+61 (0)1 / 800 804 777
................................................
+61 (0)1 / 800 819 520
................................................
+64 (0)9 / 47 86 158
.....................................................
+64 (0)9 / 47 82 914
.....................................................
Declaration of Conformity
Dr. Eckerhard Strötgen