Recording Movie Images; L'enregistrement De Vidéos - Samsung SC-DX100 Guide D'utilisation

Table des Matières

Publicité

DVD camcorder mode:
recording/playback

RECORDING MOVIE IMAGES

You should set the Storage mode switch to
DISC before recording on a disc.
(SC-DX103/ DX105 only) page 30
You can record movie images using the remote
control. (SC-DX105 only) page 13
This DVD camcorder provides two Recording
start/stop buttons. One is on the rear side of the
camcorder and the other is on the LCD panel.
Select the Recording start/stop button that
works best for you.
1. Turn the DVD camcorder on.
Connect a power source to the DVD
camcorder.
(A battery pack or an AC power adaptor)
Slide the POWER switch downwards to turn
the DVD camcorder on.
Set the Storage mode switch to DISC.
(SC-DX103/ DX105 only) page 30
2. Check the subject on the LCD screen. (Lens
and LCD)
Set the Lens open/close switch to open
( ). page 10
3. Press the Recording start/stop button.
The (  ) recording indicator will display, and
recording will start.
Press the Recording start/stop button
again to stop recording.
4. When recording is fi nished, turn the DVD camcorder off.
33_ English
mode caméscope DVD :
enregistrement/lecture
L'ENREGISTREMENT DE VIDÉOS
Vous devez régler le bouton Storage mode sur
STBY
0:00:00 [30 min]
DISC avant d'enregistrer sur un disque.
(SC-DX103/ DX105 uniquement) page 30
Vous pouvez enregistrer des vidéos à l'aide de
la télécommande. (SC-DX105 uniquement)
page 13
Le caméscope DVD vous offre deux touches
Enregistrement marche/arrêt. L'une est
située à l'endos du caméscope DVD et l'
autre sur l'écran ACL. Choisissez la touche
Enregistrement marche/arrêt qui vous
convient.
1. Allumez le caméscope DVD.
2. Réglez la mise au point du sujet sur l'écran ACL.
(Objectif et ACL)
0:00:00 [30 min]
3. Appuyez sur la touche Enregistrement marche/
arrêt.
4. Éteignez le caméscope DVD à la fi n de l'
enregistrement.
Branchez votre caméscope DVD sur une
source d'alimentation.
(Bloc-piles ou adaptateur CA.)
Faites coulisser le bouton POWER vers le
bas pour allumer le caméscope DVD.
Réglez le bouton Storage mode sur DISC.
(SC-DX103/ DX105 uniquement) page 30
Déplacez le bouton Objectif ouvert/fermé
sur ouvert ( ). Page 10
Le témoind d'enregistrement (  ) s'affi che et
l'enregistrement débute.
Appuyez à nouveau sur la touche
Enregistrement marche/arrêt pour
interrompre l'enregistrement.
Français _33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sc-dx103Sc-dx105Sc-dx100t

Table des Matières