Johansson profino 6610 Mode D'emploi page 9

Notes :
> Input BI-FM can be programmed for BI, FM or BI+FM:
BI: select Start and set "b1".
FM: select Start and set "b2".
BI+FM: select Start "b1" and
> VHF cluster: the display shows
> DAB: set BIII / DAB cluster from Ch.09 to Ch.12 or set to the specified channels.
> Single channel mode: when the
Start
> Park function: to switch off the cluster, select
Start
> If there are overlapping clusters, the display dots will blink alternately.
Start
Cluster 1
Stop "b2".
to for the standard
L5 L10 "L"
Start Channel is selected, the
Start Channel and set
Cluster 1 = Ch. 22 to Ch. 26
Cluster 2 = Ch. 25 to Ch. 29
Ch. 22 Ch. 26
Ch. 25 Ch. 29
9
channels and to for the
05 12
Stop Channel is automatically set at the same value.
. The Stop Channel goes automatically to
00
Cluster 2
Channel
standard channels.
"B/G"
.
00