Johansson profino 6610 Mode D'emploi page 14

To switch on the DC power supply
• Turn the button to select the
> Push the button to enter the selected mode.
> Turn the button to select the BIII/DAB input or the UHF cluster.
> Push the button to confirm.
• Turn the button to select the
> Push the button to enter the selected mode.
> Turn the rotary button to get DC remote power on selected input or cluster
> Push the button to confirm.
Notes:
When DC is switched on for one cluster , it is not necessary to switch it on the other clusters from the same UHF input.
In case of short circuit , the display shows "SC" blinking.
Remove the short-circuit to restore normal operation of the unit.
Filter-Input mode.
Filter Input
Filter Input
Filter Input
DC mode.
with remote power
14
The LED is green.
The LED is red.
The LED is green.
DC
The LED is green.
DC
The LED is now red
without remote power
DC
The LED is green.