Johansson profino 6610 Mode D'emploi page 10

To check the channel settings of each cluster:
• Turn the button to select the
> Push the rotary button to enter the selected mode.
> Turn the button to choose the cluster to be checked.
> The display shows the channels which have been set
Examples:
> Push the button to exit.
Filter-Input mode.
10
Filter Input
The LED is green.
Filter Input
The LED is now red.
Cluster is parked.
Cluster is set to channel 22.
Blinking 22 and 26:
cluster is set from 22 to 26
Filter Input
The led is green.