Johansson profino 6610 Mode D'emploi page 13

DC REMOTE POWER
Unit can power 12 V or 24 V outdoor preamplifiers on BIII / DAB and UHF inputs.
To set 12 or 24 V DC power supply
> Turn the button to select the
> Push on the rotary button for more than 3 seconds to enter the selected mode.
3 s.
> Turn the button to select the value of DC remote power
> Push the button to confirm.
Note:
Only one value of DC can be set.
It's not possible to get 12 V on UHF1 and 24 V on UHF2 for example.
DC mode.
DC
DC
DC
13
The LED is green.
The LED is now red.
or
The LED is green.