Safety Instructions - Johansson profino 6610 Mode D'emploi

M U LT I CH A NNEL P R O G RAM M A B LE F I LTE R- AM P LI F IE R
FEATURES
> Designed for both digital and analogue channels
> 4 inputs : B I-FM , B III / DAB and 2 UHF inputs splitted over 5 UHF programmable clusters
> UHF clusters can have 1 to 7 channels bandwidth
> B III/ DAB input with 1 or 4 channels bandwidth filter
> BI-FM input for B I or FM or B I + FM
> Easy programming by using one rotary / push button viewed on 2 digits display and LED's for each cluster
and each input
> Unit can be locked by security code
> "Copy" function in order to transfer all settlements from one unit to another reducing time of installation
> High selectivity filters
> Low noise and high gain split band amplifiers
> High UHF inputs levels up to 105 dBμV by switchable 20 dB input amplifier
> Attenuators with 1 dB step for accurate equalization
> Selectable remote power on B III and UHF inputs
> 12 - 24 V selectable remote power
> -30 dB Test output

SAFETY INSTRUCTIONS

Read carefully these instructions before connecting the unit.
The operating voltage is indicated on the apparatus.
To prevent fire, short circuit, shock hazard:
Do not expose the unit to rain or moisture.
Install the unit in a dry location without infiltration or condensation of water.
Do not expose it to dripping or splashing.
Do not place objects filled with liquids, such as vases, on the apparatus.
If any liquid should accidentally fall into the cabinet, disconnect the power plug.
Refer to qualified technician before it's further operation.
To avoid any risk of overheating:
Install the unit in a well airy location and keep a minimum distance of 15 cm around the apparatus for
sufficient ventilation.
Do not place any items such as newspapers, table-cloths, curtains ... on the unit that might cover the ventilation
holes.
The unit must not be exposed to any source of heat (sun, heater,...).
Do not place any naked flame sources, such as lighted candles, on the apparatus.
Do not install the product in a dusty place.
Pull out power plug to make the different connections of cables.
To avoid electrical shock, do not open the housing of adapter.
Cleaning:
Only use a dry soft cloth to clean the cabinet. Do not use solvent.
Servicing:
For repairing and servicing refer to qualified personnel.
3