Bosch VCM9736/10T Manuel D'installation page 10

VCM9736/10T & VC973650T | Installation Instructions
Pole mount using the supplied bracket
• Attach the supplied pole bracket to the mounting plate using
appropriate screws and mounting holes.
• Use hose clamps (two recommended; not supplied) large enough
to fit around the pole to fasten the pole bracket to the pole. (Do
not mount to fence posts that may sway in the wind.)
• Pass the cable through the mounting plate and connect it to the
camera unit.
• Click the camera unit onto the mounting plate.
• Lock the mounting plate to the PIR camera unit by turning the
lock screw.
Pole bracket
Bosch Security Systems | 2003-09 | Version 1
EN | 8
Mounting plate