Removing The Harness - Babyauto More ZITI_FIX 123 Manuel D'installation

6. INsTallaTIoN IN VeHICle / GRoUp 2/3

6.1. RemoVING THe HaRNess

only GRoUp 2/3. From approx. 4 to 12 years of age (15Kg-36Kg)
1. Remove the chest belts and chest dissipators from the corresponding
connectors (12, 13) on the rear section of the child seat (fig. 1).
2. Pull the chest belts and the chest dissipators forward from the child seat
until the entire belt comes out (fig. 2).
3. Pull the chest belts under the booster and remove them from the child
seat (fig. 3).
fig. 1 fig. 2
46
fig. 3
4. Lift the child seat cover from the child seat
and remove the buckle anchoring point by
passing it through the hole in the child seat
to free the harness buckle (06) (fig.4).
5. Replace the cover on the booster.
6.2 CHIld seaT INsTallaTIoN
1. Remove the Isoclick Fix® (12) adapters, turning them until they are fully
opened (fig. 1).
2. Place the child seat in the vehicle seat and push the Isoclick Fix® system
adapters up against the vehicle's isofix system until they hook and close
with a "click" (fig. 2, 3).
fig. 1 fig. 2
fig. 4
fig. 3
ClICK
47