Sms Commands; Switch Off - Elbro SMSB10 AD Mode D'emploi

SMSB10 AD V1.02
3

SMS Commands

This chapter describes the format of the SMS commands as well as the individual commands
themselves.
3.1 Command Structure
Ensure your SMS commands for control and interrogation of the SMSB10 AD always have the
following format:
Password # Command
Example: 1234#1
3.2 Representation
Communication between your mobile and the SMSB10 AD is as follows:
D SMS Text
Example
⇒
Sample
⇐
Column D indicates the Direction the SMS is sent:
⇒ from your mobile to the Butler
⇐ from the Butler to your mobile
3.3 Switch ON
The switch ON command is: 1
D SMS Text
1234#1
⇒
GSM Remote Control:
⇐
ON

3.4 Switch OFF

The switch OFF command is: 0
D SMS Text
1234#0
⇒
GSM Remote Control:
⇐
OFF
Explanation
User sends the SMS "Example" to the SMSB10 AD Butler.
The SMSB10 AD Butler sends the SMS "Sample" to the mobile.
Explanation
The two-colour LED lights green, contacts COM and NO
are connected, NC is open.
The SMSB10 AD sends this SMS acknowledgement back
to you, the command issuer.
Explanation
The two-colour LED lights red, contacts COM and NC are
connected, NO is open.
The SMSB10 AD sends this SMS acknowledgement back
to you, the command issuer.
27