Sony CDX-MP450X Mode D'emploi page 13

Playing the stored program
During playback, press (3) (PGM).
Program Play starts.
To return to normal play mode, select
"PGM -OFF."
Note
"NO DATA" appears in the display if no track is
stored in the program.
Erasing an entire program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
3
Press the (–) side of (FLDR/PRESET)
repeatedly until "ERASE-ALL" appears.
4
Press (ENTER) for 2 seconds.
The entire program is erased.
5
Press (MENU) twice.
Adding tracks to the program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
When adding a track to the end of a
program, skip step 3.
3
Press either side of (FLDR/PRESET)
repeatedly to select the program number
where you want to insert a new track.
4
Press (SEEK) to select the new track.
5
Press (ENTER).
The selected track is inserted at that
program number, and the succeeding
tracks are renumbered.
To continue inserting tracks, repeat steps 3
to 5.
6
Press (MENU) twice.
Note
Once all 20 slots have been filled, "**FULL**"
appears in the display, and you cannot insert more
tracks.
Erasing tracks in a program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
3
Press either side of (FLDR/PRESET)
repeatedly to select the program with
the track number you want to erase.
4
Press (ENTER) for 2 seconds.
The selected track is erased, and the
succeeding tracks are renumbered.
5
Press (MENU) twice.
Program No.
13