Product Description - TESTO 104-IR BT Mode D'emploi

Information on standards

5. Product description

6. Commissioning
Inserting batteries
This product complies with the EN 13485 standard for
penetration measurement.
Suitability: S, T (storage, transportation)
Environment: E (transportable thermometer)
Accuracy class: 0.5
Measuring range: -50...+250 °C
According to EN 13485, the measuring instrument
should be checked and calibrated regularly under the
terms of EN 13486 (recommended frequency: yearly).
Contact us for more information.
1 Infrared sensor
2 2-point laser
3 Display
4 Control keys:
· [ON]: switches the instrument on
· [OFF]: switches the instrument off
(hold button down)
· [ ]: switches to IR measurement,
carry out IR measurement (hold
button down)
· [ ]: switches to contact
measurement
· [ /HOLD/MIN/MAX]: Hold reading,
show minimum / maximum value,
sends readings to the mobile Testo
terminal (Bluetooth
5 Battery compartment (at the back)
6 Fold-out immersion/penetration probe,
folding out the probe switches the
instrument on
1 Use a slotted screwdriver to undo the
screw on the battery compartment.
2 Open the battery compartment.
3 Insert batteries (2x type AAA). Observe
the polarity!
4 Close the battery compartment.
5 Tighten the screw.
®
)
13