Makita DUR361U Manuel D'instruction page 9

Indicating the remaining battery capacity
(Only for battery cartridges with "B" at the end of the
model number.)
2
015676
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps light up for few seconds.
Indicator lamps
Lighted Off
015658
NOTE:
Depending on the conditions of use and the
•
ambient temperature, the indication may differ
slightly from the actual capacity.
Remaining battery capacity indication
(Country specific)
2
014808
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
1. Indicator lamps
2. CHECK button
1
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
1. Battery
indicators
2. CHECK button
1
Remaining battery capacity indication
Battery indicators
(Battery 1 or Battery 2)
On Off
or
014809
Abnormal indications during use
Battery indicator
On Off
Battery 1 Battery 2
014811
The indicators show various states using the remaining
battery capacity indication.
Power switch action
WARNING:
Before inserting the battery cartridge into the
•
tool, always check to see that the switch
trigger actuates properly and returns to the
"OFF" position when released. Do not pull the
9
Remaining
capacity
Blinking
50% to 100%
20% to 50%
0% to 20%
Charge
the battery
Status
The tool may have
malfunctioned.
The tool may have
malfunctioned.
The protective function for
battery with star marking
operated (overheat).
Few remaining capacity,
charge the battery.
The tool detected an
abnormally high voltage.
Replace battery cartridge.