Setting Up Your Tv; Connecting An Antenna Or Direct Cable; Connecting A Cable Or Satellite Receiver; Connecting A Standard A/V Device - Insignia NS-F27C Guide De L'utilisateur

Setting up your TV

Connecting an antenna or direct cable

Back of TV
To connect an antenna or direct cable:
1 Plug one end of a coaxial cable into your
antenna or cable wall jack.
2 Plug the other end of the cable into the
antenna jack on the back of your TV.

Connecting a cable or satellite receiver

To connect a cable converter box or satellite
receiver:
1 Connect a coaxial cable from your cable or
satellite signal source to the IN jack on cable
converter box or satellite receiver.
2 Plug a coaxial cable into the OUT jack on
your cable converter box or satellite receiver,
then plug the other end of the cable into the
antenna jack on the back of your TV.
6

Connecting a standard A/V device

Your TV has two sets of standard A/V jacks. One
set is on the back of your TV. The other set is on
the left side of your TV.
Back of TV
To connect a standard A/V device to the back
A/V jacks:
1 Plug the video (yellow) connector on a
standard A/V cable into the video out jack on
the external device, then connect the other
video (yellow) connector into the VIDEO1 IN
jack on the back of your TV.
2 Plug the left audio (white) connector on a
standard A/V cable into the left audio out jack
on the external device, then connect the
other left audio (white) connector into the
AUDIO IN L (left) jack on the back of your
TV.
3 Plug the right audio (red) connector on a
standard A/V cable into the right audio jack
on the external device, then connect the
other right audio (red) connector into the
AUDIO IN R (right) jack on the back of your
TV.
To connect a standard A/V device to the side
A/V jacks:
1 Plug the video (yellow) connector on a
standard A/V cable into the video out jack on
the external device, then connect the other
video (yellow) connector into the VIDEO2
jack on the side of your TV.
2 Plug the left audio (white) connector on a
standard A/V cable into the left audio out jack
on the external device, then connect the
other left audio (white) connector into the
AUDIO L (left) jack on the side of your TV.
3 Plug the right audio (red) connector on a
standard A/V cable into the right audio out
jack on the external device, then connect the
other right audio (red) connector into the
AUDIO R (right) side on the back of your TV.
www.insignia-products.com
Insignia NS-F27C 27" Flat Tube TV