Jøtul F 105 Série Manuel D'installation Et D'utilisation page 25

Fig. 32
A
1. Remove the gasket (A) placed on the inside of the door,
clean the gasket groove and glue on a new gasket.
Fig. 33
A
A
2. Unscrew the glass holder (B) that is attached with 4
screws (A). NB: The glass in the door is loose. Be
careful not to knock the glass when the glass holder
is loosened.
Fig. 34
3. Remove the glass (A) carefully. Remove the gaskets (B),
and clean the gasket grooves.
4. Glue on new gaskets.
B
Fig. 35
A
5. Remove the old gasket (A) and clean the grooves. Glue
on a new gasket.
6. Install back all parts once all damaged gaskets have been
replaced.
ENGLISH
A
B
25