Jøtul F 105 Série Manuel D'installation Et D'utilisation page 14

ENGLISH
4.1 Prior to installation - Jøtul F 105
with long legs
Fig. 4
B
A
4. Remove the two transport screws (A) that fasten the stove
to the wooden pallet.
5. Leave the stove standing on the transport pallet.
6. Take out the glove, bag of screws, external air connector
and adapter lying in the burn chamber.
7. Check that the control lever (B) moves easily.
14
A
Fig. 5
A
8. Install the height adjustment screws with plastic caps
placed in the bag of screws.
9. Lift the stove from the pallet.
10. Set up the stove and adjust using a cap wrench to a
horizontal position with the 4 height adjustment screws.
Mark on the wall if there has to be a rear outlet for fl ue pipe
and external air supply. NB: Take into account the height
of the fl oor plate.
Approval label
Fig. 6
1. Take the approval label (A) out of the burn chamber and
fasten it with the screw (B), as displayed. Tighten the screw
with a cap wrench. NB: Do not cut off the wire used for
fastening the label.
A
B
A