Check-Up; Settings; 10. Appliance Disposal - Bartscher FRE91M00 Manuel D'installation

8.5.

Check-up

Before starting the appliance the installation
check-up should be run to evaluate the working
conditions of every single
recognize any errors.
It is recommended to run the following check-ups:
9.

SETTINGS

There are no special default settings of the
appliance. The only settings are those set up by
the user while using the appliance.

10. APPLIANCE DISPOSAL

The appliance is marked in conformity with
the European Directive 2002/96/EG WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE).
By disposing the appliance in accordance
with the regulations the user contributes towards
prevention of adverse effects on environment and
health.
The symbol on the product or
attached manual indicates that the product cannot
1. Check that the energy supply voltage is the
component and 2. Turn on the automatic switch-off to check the
3. Check that the protection devices work
be considered as ordinary household waste and
should be transferred to a special collection point
for
recycling.
Local waste management regulations should be
observed.
Further information on procedure, reusing and
recycling of the product is available in local
offices, waste management unit or with the
product sales agent.
13
ENGLISH
A
same as of the appliance voltage.
electrical connections.
correctly.
electrical and electronic
A
GB
appliances for