Installation Of The Device - Aspire Proteus E-Hookah Set Manuel D'utilisation

USING THE DEVICE
Please note the following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit in the
liquid-filled tank for around 15 minutes after installation before you start vaping. To do this,
please turn the clearomizer upside down. Do not clean the head with water. If necessary,
simply wipe with a dry cloth Because atomizer heads are wearing parts, they must be
changed regularly.

Installation of the Device

1. Connect the Proteus clearomizer to the Proteus E-Hookah
via the thread.
2. Remove the upper components (tobacco head, plate, etc.)
from the pillar of your hookah.
3. Place the Proteus E-Hookah on the pillar, making sure the
components are airtight.
44