Aspire Proteus E-Hookah Set Manuel D'utilisation page 45

USING THE DEVICE
Filling the E-Liquid
1. Close the Airflow Control and place the nozzle of your e-liquid bottle or
pipette tip on the spring-loaded filling tube.
2. Apply a little pressure so that the spring moves downwards and then
fill the tank.
Please note the following:
As soon as no more pressure is exerted on the filling tube, the clearomizer closes again so
that no e-liquid can escape.
Changing the Atomizer Head
1. Screw the top metal cap counterclockwise from the clearomizer tank.
2. Please remove any e-liquid residues from the glass tank and remove it by gently
twisting and pulling from the device.
3. Unscrew the old atomizer head and replace it with a new one.
4. Reconnect all components, fill the tank with e-liquid and make sure that no e-liquid
can escape.
43