Copying Files; Using A Dvd Burner To Copy Files From The Camcorder - JVC GZ-MS100 Manuel D'utilisation

Copying Files

Types of Copying and Connectable Device
Using a DVD Burner to Copy
Files from the Camcorder
Supported discs: 12cm DVD-R, DVD-RW
•
Regarding DVD-R discs, only unused DVD-
R discs can be used. Regarding DVD-RW
discs, used DVD-RW discs can also be
used, but they need to be formatted before
recording. Formatting a disc deletes all
content recorded on the disc up until that
time.
•
Dual-layer discs cannot be used.
Regarding finalization after copying
The disc is automatically finalized so that
it can be played on other devices. After
finalizing, the disc is a play-only disc, so no
more files can be added.
NOTE
When using the optional DVD Burner, read its
instructions.

DVD Burner
(CU-VD3)
You can copy video files
recorded on this camcorder
onto DVD discs. (Z right
column)
PC
You can copy video/
still image files on this
camcorder onto your PC.
(Z pg. 23 to 29)
Connection with a DVD Burner
Preparation:
Close the LCD monitor to turn off the camcorder.
To AC Outlet
USB Jack
DVD Burner
NOTES
•
Use the USB cable that came with the DVD
burner.
•
It is recommended to use the AC Adapter
as the power supply instead of the battery
pack.
!
Copying Video Files that Have Never
Been Copied
Files that have never been copied to the DVD
discs are automatically selected and copied.
1
Open the LCD monitor to turn on the
camcorder.
2
Press the DIRECT DVD button.
3
Select [EXECUTE].
•
The DVD disc begins to be created.
When [COMPLETED] appears, touch
the OK button.
•
When [COMPLETED. CHANGE DISC]
appears, change the disc. The second
DVD disc begins to be created.
•
To cancel the DVD creation, select
[STOP].
L
To quit the screen
1) Select [QUIT].
2) When [QUIT?] appears, select [YES].
AC Adapter
DC Jack
USB Jack
USB Cable