Husqvarna LC 141iV Manuel D'utilisation page 14

7. Put the cables around the hook at the bottom of the
handle.
To adjust the handle height
1. Loosen the lower knobs.
2. Remove the knob, washer, and screw on the left and
the right side.
3. The handle can be set to 2 different heights. Put the
screw in one of the 2 holes on the left and the right
side.
4. Attach the screws, washers and knobs.
5. Move the knobs up in the direction of the handle until
they stop and you hear a click. Tighten the knobs
fully.
14
To assemble the grass catcher
1. Push the 2 transportation covers out and down.
2. Put the top part of the grass catcher onto the lower
part of the grass catcher. Attach the grass catcher
frame with the clips.
3. Lift the rear cover.
4. Attach the hooks on the grass catcher to the top
edge of the chassis.
To assemble the mulching-kit
1. Lift up the rear cover and remove the grass catcher.
919 - 010 -