Maintenance And Cleaning; After Use/Storage; After-Sales Service And Application Service - Bosch AXT 22 D Notice Originale

Problem
The material to be shredded is
not pulled in
Shredded material is not com-
pletely separated and hangs to-
gether as a chain
The material stucked between
the cutter and pressure plate
and cannot be released by the
reverse button

Maintenance and Cleaning

Warning! Switch off, remove plug from mains before
adjusting, cleaning or if cable is cut, damaged or entan-
gled.
Always wear protective gloves when using, adjusting
or cleaning the garden product.
Note: To ensure long and reliable service, carry out the follow-
ing maintenance regularly.
Regularly check for obvious defects such as loose, dislodged
or damaged blades, loose fixings, and worn or damaged com-
ponents.
Check that covers and guards are undamaged and correctly
fitted. Carry out necessary maintenance or repairs before us-
ing.
If the garden product should happen to fail despite the care
taken in manufacture and testing, repair should be carried out
by an authorised customer service agent for Bosch garden
products.
Removing the Pressure Plate
(see figure J)
Warning! Switch off, remove plug from mains before
adjusting, cleaning or if cable is cut, damaged or entan-
gled.
Always wear protective gloves when using, adjusting
or cleaning the garden product.
The cutting roller 16 and the pressure plate 15 have a life ex-
pectancy of several years under normal usage and when ad-
justed according to instructions.
Use the following to remove the pressure plate 15, to aid
cleaning or for replace:
Unscrew the pressure plate screw fully as shown.
Lift out pressure plate 15 using screw driver.
Fit in the reverse order, the pressure plate 15 will require ad-
justment (see "Pressure Plate Adjustment (see figure H)").
Bosch Power Tools
Possible Cause
Material to be shredded is wet and
soft
Jammed material in the machine
Pressure plate requires adjustment see "Pressure Plate Adjustment (see figure H)"
Pressure plate were over set
Corrective Action
Use the prodder to push the material into the machine
Clear jammed material (always wear protective gloves)
Use the reverse button (see "Return Motion")
Push in adjusting knob 10 and insert Allen key 17 (sized
5 – not included) into the recess on the end of adjust-
ing screw and release by anti clockwise (see figure I)
Then repeat pressure plate adjustment (see "Pressure
Plate Adjustment (see figure H)")

After Use/Storage

The shredder must not be cleaned with high-pressure clean-
ers or running water.
Clean the exterior of the machine thoroughly using a soft
brush and cloth. Do not use water, solvents or polishes. Re-
move all grass and debris, especially from the ventilation slots
3.
Store the machine in a dry place. Do not place other objects
on top of the machine.
Cable can be stored on the shredder as shown (only UK).
(see figure K).
The shredder can be stored as in figure B by removing the
chute assembly (see also "Assemble the chute
(see figures E–F)").
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
English | 21
F 016 L81 437 | (23.11.15)