Maintenance And Storage; Product Description And Specifications; Intended Use; Delivery Scope - Bosch AXT 22 D Notice Originale

Never pick up or carry the machine
while the motor is running.
Switch off, allow the cutter to stop
and remove the plug from the mains
supply whenever you leave the work
area.
Do not tilt the machine while it is run-
ning.
Do not expose the machine to rain.
Only store the machine in a dry place.
When using an aggregator then it
needs to be an Automatic Voltage
Regulation (AVR) version avoiding
damages caused by overvoltage
spikes.

Maintenance and Storage

When the machine is stopped for ser-
vicing, inspection, or storage, or to
change an accessory, switch off and
remove the plug from the mains sup-
ply and allow the machine to cool.
Make sure that all moving parts have
come to a complete stop before mak-
ing any inspections, adjustments,
etc.
Maintain the machine with care and
keep it clean.
Examine the machine and replace
worn or damaged parts for safety.
Ensure replacement parts fitted are
Bosch approved.
If an extension cord is used it shall not
be of lighter grade than the supply
cord already fitted to the machine.
Check the supply and any extension
cord regularly for damage or signs of
ageing. Do not use the machine, if the
cords are damaged.
Bosch Power Tools
When servicing the cutter be aware
that, even though the motor will not
start due to the interlock feature of
the guard, the cutter can still be
moved if the motor is turned by hand.
Never attempt to override the inter-
lock feature of the guard.
Product Description and Specifica-
tions
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious in-
jury.

Intended Use

The product is intended for cutting of fibrous and woody gar-
den waste for composting.
The collection box is intended for collecting the material cut,
and for storing the chute assembly and prodder.
The collection box should not be used for other purposes.

Delivery Scope

Carefully remove the garden product from its packaging and
check if the following parts are complete:
– Quiet-shredder
– Chute assembly
– Prodder
– Collection box
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
When fully assembled the garden product weighs approxi-
mately 30,5–31,3 kg. If necessary, obtain assistance to re-
move from packaging.

Product Features

The numbering of the garden product features refers to the il-
lustration of the garden product on the graphics page.
1 Undercarriage
2 Power plug**
3 Ventilation slots
4 Green button
5 Red STOP button
6 Yellow button
7 Prodder
8 Chute assembly
9 Clamping knob
10 Adjustment knob
English | 17
F 016 L81 437 | (23.11.15)