Maintenance And Service; After Use/Storage - Bosch Aquatak Go Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
OBJ_BUCH-683-001.book Page 22 Thursday, February 7, 2008 4:29 PM
22 | English
Problem
The pressure washer starts irregu-
larly by itself
Water leaks from machine

Maintenance and Service

Maintenance
Stop, remove plug from the power supply
and disconnect from water supply.
Note: To ensure long and reliable service, carry
out the following maintenance regularly.
Regularly check for obvious defects such as
loose fixings, and worn or damaged compo-
nents.
Check that covers and guards are undamaged
and correctly fitted. Carry out necessary mainte-
nance or repairs before using.
If the machine should happen to fail despite the
care taken in manufacture and testing, repair
should be carried out by an authorised custom-
er service agent for Bosch garden products.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Cleaning/inspecting the strainer
Expose the strainer 18 in the machine water in-
let connection by removing the inlet connector
12.
The strainer 18 can be easily removed with long
nose pliers. Rinse and replace. If damaged re-
place.
Never use the pressure washer without the
strainer or a damaged strainer.
F016 L70 529 | (7.2.08)
Possible Cause
Pump/power gun leaky
Leaking pump

After use/Storage

Clean the exterior of the machine thoroughly us-
ing a soft brush or cloth. Do not use water, sol-
vents or polishes. Remove all debris, especially
from the ventilation slots.
Frost will damage a pressure washer that has
not been completely emptied of water. To pre-
pare machine for longer storage in cold condi-
tions, run without connecting to water supply
for no more than 30 seconds. The machine
should be stored in a frost free room.
Do not place other objects on top of the ma-
chine.
Ensure cables are not trapped when storing. Do
not kink high pressure hose.
After-sales Service and Customer As-
sistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
L
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Corrective Action
Contact your Bosch Service
Centre
6 drops per minute are per-
missible. In case of more seri-
ous leakage, you should con-
tact your Bosch Service
Centre.
Bosch Power Tools

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aquatak go plus

Table des Matières