Airwell RWV05 Manuel D'installation Et De Fonctionnement page 26

Operation
Temp. Compensation Setting
(1) In OFF state, keep pressing key for 5 seconds, the current temp. compensation value is
displayed on the top-right of the screen and flashes. "00" is the default value.
(2) When in celsius system, ambient compensation value is -04~+04°C, while in fahrenheit system,
ambient compensation value being -07~+07°F. The temp. compensation value can be adjusted by
pressing .
(3) After adjustment, press key to confirm the setting.
(4) The compensation value is used for ambient temp..
(5) The compensation value is valid only in the state of collecting ambient temp. of wired controller.
Forced Cooling/ Heating
(1) Powered off in cooling mode, keep pressing "ON/OFF" key for 10 seconds, it will enter into the
forced cooling function, and the cooling mode icon will be displayed on the interface. "LL" is flashing in
the temp. area at the same time. Press "ON/OFF" key to power off and exit forced cooling.
(2) Powered off in heating mode, keep pressing "ON/OFF" key for 10 seconds, it will enter into the
forced heating function, and the heating mode icon will be displayed on the interface, "HH" is flashing
in the temp. area at the same time. Press "ON/OFF" key to power off and exit forced heating.
23