Airwell RWV05 Manuel D'installation Et De Fonctionnement page 24

Operation
Static Pressure Grade Inquiry and Adjustment Function
(1) In the state of ON and non screen saving state, press Fan + Set keys for 5s to enter static pressure
grade adjustment state with static pressure icon flashing and current static pressure grade statically
displaying. Press key to change static pressure grade, then press Set key to confirm.
(2) The unit No. will display by two 8 segments after colon on the top-left corner, and static pressure
grade will display by two 8 segments after colon on the top-right corner. Press Time key to shift unit
No..
(3) Unit No. will show decimally from 00-15. Static pressure will be shown decimally from 01-04.
(4) In query and adjustment state, if there is no screen saving, press ON/OFF key to quit current state
and turning on/off unit, with changed values not being saved.
(5) Static pressure is the inquired value with non-volatile memory invalid.
(6)The number about the indoor units' static pressure grade and the static pressure grade executed by
the indoor units can be queried/ changed by the wired controller(Only valid for part of models).
(7) The number about the static pressure grade and the static pressure grade can also be queried/
changed by advanced setting interface(Only valid for part of models).
Communication with Central Controller
(1) The controller displays to show central control mode after receiving central control signal from
indoor unit;
(2) When statically displays, all keys except "ON/OFF" of wired controller are invalid. central icon will
disappear if no central control signal from indoor unit.
(3) When receiving locking signal from indoor unit, statically display, all keys are invalid.
(4) In central or lock state, screen saving is valid; press any key to wake up screen.
(5) In central or lock state, malfunction inquiry, indoor unit parameter inquiry and child lock are valid.
21