Airwell RWV05 Manuel D'installation Et De Fonctionnement page 15

Operation
(3) If Sw5 is off, some models can self-adaptive the swing setting and swing angle control.
① If the angle of the Up/Down swing can be adjusted:
Press SET key to enter the function circulation; the Up/Down swing icon will flash. Press the SET key
again; the swing angle will flash(if powered on for the first time, default angle will be different according
to different modes; if not for the first time, the angle of swing will be displayed as last time). At this time,
swing angle can be adjusted by Up/Down key (when in intelligent mode, the swing angle is position
1,press up key to automatic swing, and press down key to position 2).When pressing Up/Down key
to adjust angle, If no operation in 10s, it will exist angle adjustment and function circulation. Interface
displays the last angle. If you want to set other functions like sleep function, you need to press SET
key again to enter function circulation.
② If the angle of the Up/Down and Left/Right swing can be adjusted:
Press SET key to enter the function circulation, and the Left/Right swing icon will flash. At this time,
press Up/Down key to switch to Up/Down swing icon flashing. When Left/Right swing icon flashing,
Press SET key again, the angle of Left/Right swing will flash(if powered on for the first time, the default
angle is in position 1, the middle position of Left/Right swing icon; if not for the first time, the angle will
be displayed as last time).
(4) Pressing Fan key or Mode key can both exit swing function, with no order sending. When Fan
or Mode key is pressed again, the order will be sent. If the present angle is confirmed, pressing
SET key will exit the swing function. In the adjustment process, if there is no key pressed for 10s,
swing function will be exited, and swing angle will execute the final adjusted angle. In the adjustment
process, pressing the ON/OFF key to power off the wired controller directly, and swing angle is the
final adjusted swing angle.
12