General Information - Dreve Labormat SD Mode D'emploi

Labormat SD, TH

18. General information

Repairs and maintenance work on
Labormat devices may only be carried
out by qualified personnel. In any case,
the power supply to the device must be
interrupted. The Dreve Group is only
responsible for the safety, reliability and
performance of the device when:
· the device is only used for the cor-
responding designated application.
· operation is only by qualified personnel.
19. Warranty
The warranty period is 2 years as of
the delivery date. The warranty only
applies for material or manufacturing
errors. Warranty claims do not apply
for natural wear or damage incurred
after the transfer of risk as a result of
incorrect or non-designated handling,
excessive strain, unsuitable operating
equipment and such chemical, electro-
chemical or electrical influences which
are not intended by the contract. War-
ranty claims are excluded by any non-
designated modifications made by the
customer, third parties or maintenance
and repair work as well as in the event
of violation of lead seals.
68
· the device is used in accordance with
these operating instructions
· extensions, new settings, modifica-
tions or repairs are only carried out by
persons authorised by Dreve.
As we constantly strive to develop our
products, we reserve the right to make
technical modifications.
Responsibility for defects
Claims for defects shall expire one
year after delivery. Claims for defects
do not apply for natural wear or dam-
age incurred after the transfer of risk
as a result of incorrect or non-desig-
nated handling, excessive strain, unsuit-
able operating equipment and such
chemical, electro-chemical or electri-
cal influences which are not intended
by the contract. Claims for defects are
excluded by any non-designated modi-
fications made by the customer, third
parties or maintenance and repair work
as well as in the event of violation of
lead seals.
69