Sleep Timer; Tilt Function - Dyson Hot+Cool AM09 Manuel D'utilisation

Sleep timer

To set the sleep timer, press and hold the timer button to select the
desired time. When time reaches zero, the appliance will go into
standby mode. To cancel, reduce the time until two dashes appear.
Diffused and personal heating modes
Diffused mode
Press the wide angle button to
change from personal heating
to whole room heating.
Heating and cool modes
work in this mode.
Personal heating mode
Press the narrow angle button
to change from whole room
heating to personal heating.
Heating and cool modes
work in this mode.

Tilt function

Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
Oscillation and airflow speed control
Oscillation control
To start the appliance oscillating,
press the oscillation control
button. To stop the appliance
oscillating, press it again. The
appliance will not oscillate when
the control buttons are pressed.
Airflow speed control
To change the airflow speed
press the airflow control button.
The digital display will show
the new speed; after 3 seconds
it will change back to the
target temperature.
41 41