Description; Catalogue Number - ASCO Numatics Sentronic Plus 614 Série Manuel D'installation

INSTALLATION
1.

DESCRIPTION

PLUS
The S
entronic
gent electronics. The S
ment or angle positions. It supplements the S
PLUS
The S
entronic
provided to cover a wide flow range. Versions with different body and seal materials can be used in many sectors,
e.g. the food industry, medical technology etc.
Cascaded control allows setting up complex control loops using the DaS software (Data Acquisition Software).
Digital control offers many advantages during installation and start-up of the S
possibilities to adapt it to various applications.
• All pressure and exhaust ports are the same size, which allows for short response times when the pressure
is increased or decreased.
• Digital pressure control in a closed loop: An internal pressure sensor measures the outlet pressure. The outlet
pressure is adjusted in real time.
The control parameters can be changed with the DaS software (from DaS release 5.00): The DaS software
•
(Data Acquisition Software) ensures the variability of the parameters used by the valve. This flexibility allows
the valve to be adapted to the most various applications, and its response time, overshoot and precision to
be optimised.
• After having set the optimum parameters, you can save them in a project file for your personal use or send
them to our Product Support for future serial production.
• ATEX approval for the version with M12 connector without display:
1.1

CATALOGUE NUMBER

PLUS
S - Digital electronic
entronic
PLUS
S - with external pressure supply
entronic
B: Control panel
D = M12 with display - non-explosionproof
E = M12 without display - explosionproof (ATEX)
F = DIN connector, 7-pin, with display - non-explosionproof
G = DIN connector, 7-pin without display - non-explosionproof
A: VERSION (ports), body
0 = DN6 (G 1/4), Alu
1 = DN12 (G 1/2), Alu
2 = DN20 (G 1), Alu
3 = DN6 (ISO 1), Alu
4 = DN6 (NPT 1/4"), Alu
5 = DN12 (NPT 1/2"), Alu
S: SETPOINT
0 = 0 ... 10 Volt
1 = 0 ... 20 mA
2 = 4 ... 20 mA
I: FEEDBACK
1 = Feedback output 0 ... 10 Volt
2 = Feedback output 0 ... 20 mA
3 = Feedback output 4 ... 20 mA
3)
4 = Feedback input 0 ... 10 Volt
3)
5 = Feedback input 0 ... 20 mA
3)
6 = Feedback input 4 ... 20 mA
with integrated digital control loop combines the latest in pneumatics technology with intelli-
PLUS
series allows precise control of pressure, flow, force, velocity and displace-
entronic
entronic
is available in 14 standard pressure ranges from 100 mbar to 50 bar. Four nominal sizes are
II 2D Ex tb IIIC T135 °C Db
q
II 3G Ex nA IIC T4 Gc
q
0 ≤ Ta ≤ +50 °C
EC type examination certificate no.: IBExU07ATEX1173
pressure regulator valve
6 1 4 3 5 7
6 1 4 3 5 9
6 = DN20 (NPT 1"), Alu
7 = DN3 (G 1/8), Ms
8 = DN6 (G 1/4), Ms
9 = DN3 (NPT 1/8), Ms
A = DN6 (NPT 1/4"), Ms
C = DN6 (G 1/4), VA
2)
H = DN6 (G 1/4), Ms
D
series.
B A S I D P P
B A S I D P P
PP: PRESSURE RADNE
Relative pressure
40 = 0 - 100 mbar
50 = 0 - 500 mbar
60 = 0 - 1 bar
02 = 0 - 2 bar
03 = 0 - 3 bar
05 = 0 - 5 bar
06 = 0 - 6 bar
10 = 0 - 10 bar
12 = 0 - 12 bar
16 = 0 - 16 bar
20 = 0 - 20 bar
3H = 0 - 30 bar
5H = 0 - 50 bar
V3 = 0 - (-1) bar
D: DIGITAL OUTPUT
1 = Pressure switch output
PNP ± 5 %
PLUS
valve and extended
entronic
Max. allowable
Vacuum (relative)
pressure (bar)
V3 = 0 ... -1 bar
2
Shut-off valve
2
2
3
8
8
12
12
14
1) 18
1)
22
2 40
)
2) 60
Notes:
1)
Only for DN3 and DN 6
2)
Only for DN6, Ms
3)
Only for 614357..., not for 614359...
Other versions available on request.
IM14229-3
GB