Warning Notes; Accessories; Maintenance And Care - ASCO Numatics Sentronic Plus 614 Série Manuel D'installation

Régulateur de pression numérique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB

WARNING NOTES

These products are intended for use in industrial compressed air systems only. Do not use these products where pres-
sures and temperatures can exceed those listed under SPECIFICATIONS. Please also see the corresponding product
specification sheets.
Before using these products with fluids other than those specified, for non-industrial applications, life-support systems,
or other applications not within published specifications, consult ASCO Numatics.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.
The system designer is warned to consider the failure modes of all component parts used in fluid power sys-
tems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of
such failure.
System designers must provide a warning to end users in the operating manual if protection against a failure mode can-
not be adequately ensured.
System designers and end users are cautioned to review specific warnings found in instruction sheets packed and
shipped with these products.
6.

ACCESSORIES

description
Straight M12 female connector, 5 pins, with screw terminals
Right-angle M12 female connector, 5 pins, with screw terminals
Supply cable 2 m, 2 x 0,25 mm², straight connector
Supply cable 2 m, 2 x 0,25 mm², right-angle connector
Supply cable 5 m, 6 x 0,56 mm², straight connector
Supply cable 5 m, 6 x 0,56 mm², right-angle connector
Supply cable 10 m, 6 x 0,56 mm², straight connector
Supply cable 10 m, 6 x 0,56 mm², right-angle connector
RS 232 cable converter; 2m cable with 9-pin Sub-D (plug connector)
RS 232 cable converter; 2 m cable with 9-pin Sub-D (screw connector)
DaS 5.00, Data Acquisition Software für S
7.

MAINTENANCE AND CARE

No special maintenance or care required.
IM14229-10
PLUS
entronic
INSTALLATION
catalogue number
88100256
88100725
88100726
88100727
88100728
88100729
88100730
88100731
88100732
88100970
Available for download at
www.asconumatics.eu

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sentronic plus 614 série

Table des Matières